Microduino Core
Microduino Core
The Microduino is an Arduino compatible board in an compact package. Imagine the possibilities of having the full power of an Arduino Uno in a size less than a quarter! In fact, most Arduino sketches will work as is without any changes.
Features
- Stackable
- Open source
- Expandable with microduino shields
Note: To program this board, you need to use the Microduino USB & ICP Board
Specifications
- U model 27pin microduino pinout
- Atmega328P processor (same as is used on the Arduino Uno)
- Work voltage 5V
- 32KB program memory / 2KB SRAM /1KB EEPROM
- Digital I/O 0~13, A0~A5
- Analog I/O A0~A7
- 6 PWM pins - pin3,5,6,9,10 and 11
- Size 25.4mm x 27.94mm
- Arduino Bootloader preprogrammed (uses 0.5 KBytes of Flash Memory)
Pinout
Documents
Getting started with Microduino
- Install Arduino IDE. You need to download the latest version of the drivers from the FTDI website.
- You'd better read this, Getting Started with Arduino
- Download Microduino package for Arduino IDE, read this post
- To program this board, you need to use the Microduino USB & ICP Board
Last edited by Linlinqi, 2014-02-17 17:37:31