Microduino Core+
Microduino Core+
The Microduino is an Arduino compatible board in an compact package. Imagine the possibilities of having the full power of an Arduino Uno in a size less than a quarter! In fact, most Arduino sketches will work as is without any changes.
Features
- Stackable
- Open source
- Expandable with microduino shields
Note: To program this board, you need to use the Microduino USB & ICP Board
Specifications
- U model 27pin microduino pinout
- Atmega644P processor
- Work voltage 5V
- 64KB program memory / 4KB SRAM /2KB EEPROM
- Digital I/O 0~23, A0~A7
- Analog I/O A0~A7
- 6 PWM pins - pin7,8,9,10,22 and 23
- 2 hardware serial port RX0/TX0 and D2, D3
- Size 25.4mm x 27.94mm
- Arduino Bootloader preprogrammed (uses 0.5 KBytes of Flash Memory)
Documents
Getting started with Microduino
- Install Arduino IDE. You need to download the latest version of the drivers from the FTDI website.
- You'd better read this, Getting Started with Arduino
- Download Microduino package for Arduino IDE, read this post
- To program this board, you need to use the Microduino USB & ICP Board
Last edited by Linlinqi, 2014-02-17 17:37:31