ChangeLog for BlueBeacon
ChangeLog for BlueBeacon
English Version
1.3 (20131216)
- Can change the advertising frequency through char FFF7
- Add battery service 180F
- Add device information service 180A
- Change the default advertising frequency from 600ms to 900ms
- The passcode is needed if you want to Read proximityUUID throuh FFF0->FFF1
- The beacon will keep advertising after it is connected by other BLE device
1.1
- Change the advertise interval from 100ms to 600ms. Prevent the power consume.
- Remove proximity service
- Can change the tx power through char FFF5.
- Can change the passcode through char FFF6.
1.0
Initial version.
中文版
1.3 (20131216)
- 可通过FFF7来修改广播频率
- 加上了电量服务180F
- 加上了设备信息服务180A
- 默认广播频率由600ms一次改为900ms
- 读取FFF0->FFF1的ProximityUUID也需要配对密码
- 在其它蓝牙设备连接之后,也会继续保持广播状态
1.1
- 将广播频率由100ms修改为600ms,大大降低功耗
- 去掉Proximity service
- 可通过char FFF5来修改发射功率
- 可通过char FFF6修改密码功能
1.0
第一个版本
Last edited by Linlinqi, 2014-02-17 17:37:31